Electric Shears
-
Payment
-
Origin
China Mainland
-
Minimum Order
10
-
Packing
Pieces
- Contact Now Start Order
- Description
Product Detail
Electrical shearing machine is mainly used for flat cutting irregular shapes, in theory only can draw diagrams with AUTOCAD can cut (diameter less than twice times the plasma cutting kerf width of the graphic cannot be cut).
Start shearing machine idling machines for several cycles to ensure that under normal circumstances, try cutting sheets of different thickness, from thin to thick. Ensure that the user is familiar with shearing machine performance.
When you try to cut different thickness must be transferred to a different blade clearance. If it does not adjust to the appropriate blade gap, then the blade life.
Shearing machine in the process of cutting open the pressure gauge switch, observe oil pressure value, cut 12mm pressure 20MPa. This remote pressure regulating valve No9, factory pressure setting 20-22MPa, the user must comply with the law, shall be allowed to cut excess increase material under pressure and cause damage to the machine.
- Electric Iron Bar Bending Machine 10 Pieces / (Min. Order)
- Manual Bending Machines 10 Pieces / (Min. Order)
- 2-4 M Hydraulic Shearing Machine 10 Pieces / (Min. Order)
- Extra Heavy Duty Hydraulic Shears With Double Cylinder 10 Pieces / (Min. Order)
- Computer Automatic Increase Bender Hydraulic Pump 10 Pieces / (Min. Order)
- 1.3 M Pedal Shearing Machine Configuration 10 Pieces / (Min. Order)
- EZW24-profile Bending Machine 10 Pieces / (Min. Order)